Reflecting on the Journey

How To Dry Shoes In Dryer Without Noise?

Whether you’re drying a pair of running sneakers, casual canvas shoes, or any other type that’s safe to put in the dryer, this guide will ensure that you can do so without the disruptive noise typically associated with the process. We will cover all the necessary steps to achieve a noise-free drying experience.

Dry Shoes Without Noise

Drying shoes in a dryer is a common practice for those looking to speed up the drying process, especially during rainy seasons, or for individuals leading an active lifestyle. The problem that many people have, though, is the noise that is produced when shoes are left to tumble within the dryer.

This noise may be both annoying and sometimes damaging to the device. The sound is not only an annoyance; it may also indicate that the dryer and your shoes are being overworked. In order to ensure a quiet and effective drying process, this guide tries to give you practical tips for drying your shoes in the dryer without making extra noise.

How To Dry Shoes In Dryer Without Noise?

When shoes are dried in a dryer, they frequently fall and hit the drum, making a loud, unpleasant noise. 

But you can reduce the noise and safely dry your shoes using the correct methods. This comprehensive article explains how to dry shoes in the dryer without creating a mess.

Useful Resources:

Why do Shoes Squeaky on Tile?

How to Make Heels Quieter?

Clean Your Shoes

Before you consider drying your shoes in the dryer, it’s imperative to ensure they are as clean as possible. This preliminary step is crucial for several reasons:

  • Prevent Damage to Dryer: During the drying process, mud, dirt, or any other kind of material may fall off and adhere to the inside of your dryer.This not only clogs your dryer but also increases the risk of damage in the event that debris enters the vents or lint trap and becomes a fire danger.
  • Avoid Permanent Stains: The heat from the dryer can set stains into the fabric of your shoes, making them much more difficult, if not impossible, to remove later. This can happen if dirt or mud is not removed before drying.


  • Remove Excess Dirt: To get as much dirt and mud off the soles and fabric of your shoes as you can, use a brush or give them a good knock outside.
  • Wipe Down: Use a damp cloth or sponge to gently wipe the surfaces of your shoes. For tougher stains or dirt, consider using a mild soap mixed with water.
  • Remove Insoles and Laces: Remove the laces and insoles if at all possible. To guarantee that every component of your shoes is perfectly clean, clean these individually. Laces can be hand washed or placed in with your usual laundry in a mesh washing bag.

Check the Label

It’s crucial to read the care label carefully for any drying guidelines or material requirements before using a dryer to speed up the drying process of your shoes.

This is an important step because it directly affects how safe and durable your footwear is. 

Shoe labels frequently include written instructions or symbols that specify the proper ways to clean and dry shoes. 

For example, fabrics like canvas and some synthetics are usually accepted as safe to use in a dryer. 

Particularly when used on low or no heat settings, these materials can tolerate some degree of heat and tumbling movement, reducing the chance of damage.

On the other hand, fabrics that are susceptible to heat and agitation include suede and leather. 

These materials may experience negative consequences from exposure to the dryer’s environment, including warping, shrinking, or cracking, which could permanently harm the construction and appearance of the shoe.

Heat treatment can also cause natural oils in leather and suede to evaporate, giving the material a brittle, stiff texture.

Read More: How To Make Heels Less Slippery?

Setting a Low Heat Option

It’s imperative to use a low heat setting in the dryer while getting ready to dry shoes to prevent any potential harm. 

The adhesives holding the shoe’s various parts together, such as the soles to the uppers, can be weakened or even melted by high temperatures, which can cause the shoes to break apart or sag. 

You should use the lowest heat setting on your dryer to avoid such results and make sure your shoes stay comfy and intact.

Here’s how to set it:

  • Locate the Temperature Control: On your dryer, find the control panel where the temperature settings are displayed.
  • Select ‘Low Heat’: Look for a setting labeled ‘Low Heat’, ‘Delicate’, ‘Gentle’, or something similar. This option provides a mild warmth that is less aggressive on the shoe materials.
  • Start the Dryer: Once the shoes are securely fastened in a towel or mesh bag to reduce noise, begin the drying process. This mild heat works well for drying without endangering the substance or structure of the shoes.

Using the Air-Dry Setting

Using your dryer’s air-dry (or air-fluff) mode is recommended for the most gentle drying option. 

The safest way to avoid any heat-related damage, such as adhesive melting or material warping, is to use ambient air instead of applying heat to dry shoes.

Here’s how to activate the air-dry setting:

  • Find the Setting Control: On the dryer’s control panel, look for an option labeled ‘Air Dry’, ‘Air Fluff’, or ‘No Heat’.
  • Select the Air-Dry Option: To guarantee that the dryer will circulate room-temperature air instead of heated air, use this setting. This technique is very useful for heat-sensitive materials.
  • Begin the Drying Cycle: Place your shoes inside the drum, ideally within a mesh laundry bag or wrapped in a towel to prevent noise, and start the cycle.

Towel Method

When drying shoes in a dryer, the towel approach works well for cutting down on noise.

To reduce the loud banging noises that usually occur when shoes hit the dryer drum, wrap your shoes in one or two old towels to act as a protective buffer while they tumble.

This technique not only reduces noise levels but also shields the dryer drum and the shoes from possible harm from direct impacts.


  • Select Old Towels: Choose one or two old towels that you don’t mind potentially getting dirty or damaged.
  • Wrap the Shoes: After positioning your shoes in the middle of the towel, firmly wrap them around, making sure they are completely covered. For optimal cushioning, you can wrap each shoe separately if you’re using two towels.
  • Place in Dryer: Put the wrapped shoes in the dryer. Set the dryer to a low heat or air-dry setting to prevent any heat damage to the shoes or towels.
  • Start the Dryer: Begin the drying cycle. The towels will absorb some of the moisture from the shoes, speeding up the drying process while reducing noise.

Mesh Bag or Pillowcase Method

Another way to reduce noise while drying is to use an old pillowcase or mesh laundry bag.

By confining the shoes, this technique lessens the noise produced within the dryer by stopping the shoes from falling around freely.

It’s a quick and simple solution to protect your shoes and keep your dryer quieter.


  • Prepare the Bag or Pillowcase: If using a mesh laundry bag, ensure it’s large enough to fit your shoes comfortably. An old pillowcase is a suitable alternative if you don’t have a mesh bag.
  • Insert Shoes: Place your shoes inside the bag or pillowcase. If using a pillowcase, tie the open end to prevent the shoes from falling out during the drying cycle.
  • Secure and Dry: Put the bag or pillowcase in the dryer, opting for a low heat or air-dry setting to avoid heat damage.
  • Monitor the Cycle: Check periodically to ensure that the shoes are drying and the bag or pillowcase is intact.

Dryer Balls or Soft Items Method

To further reduce the noise, you can add dryer balls or extra towels to the dryer (assuming you haven’t already used them to wrap the shoes).

In addition to significantly reducing drying time and static, dryer balls especially those composed of wool or rubber also lessen noise while drying shoes.


  • Choose Your Buffer Items: If not using them to wrap the shoes, place a few towels in the dryer. Alternatively, use wool or rubber dryer balls.
  • Add Shoes and Items to Dryer: Place your shoes in the dryer along with the selected buffer items. If the shoes are not already in a bag or wrapped, ensure they are loosely surrounded by these items.
  • Set the Dryer: Use a gentle drying cycle, preferably with low heat or air-dry settings, to avoid any potential heat damage.
  • Begin Drying: Start the dryer, allowing the dryer balls or towels to move freely. They will absorb some of the sounds as the shoes tumble, leading to a quieter operation.

Alternative Ways To Dry Shoes

Alternative Way To Dry Shoes

Air Drying

A simple and gentle way to properly dry shoes is by air drying them. It’s crucial to start by lightly wiping the shoes with a towel to eliminate any extra moisture. 

This aids in avoiding extended wetness, which can promote the formation of mold and odor. 

After removing extra moisture, the shoes need to be put somewhere with good ventilation. 

Avoiding direct sunlight is crucial since it can fade colors and harm some materials, especially leather and synthetic fabrics. Instead, choose a well-ventilated, shaded area. 

You can pack the shoes with rumpled paper towels or newspaper to help them dry faster and keep their shape. 

While supporting the structure, the absorbent material will aid in removing moisture from the inside of the shoes. 

Furthermore, turning the shoes over time makes sure that there is enough ventilation in every region, which encourages equal drying. 

This technique works well with a variety of shoe styles and is mild on the majority of shoe materials.

Silica Gel Packs

Packs of silica gel are very good desiccants since they absorb moisture well. By removing moisture from the material, they aid hasten the drying process when placed inside shoes. 

To dry shoes with silica gel packs, just place a few packs inside each shoe, making sure to distribute them properly. 

It’s best to leave the shoes alone for the entire night or until they have dried completely. 

This technique is especially helpful in humid settings or in the winter, when lower temperatures and greater humidity levels may cause air drying to take longer. 

Use of silica gel packs doesn’t harm the shoes and doesn’t leave any residue behind. 

They are a practical choice for people who want to dry their shoes more quickly and completely to avoid mold and odor development.


In addition to air drying, using a fan to dry damp shoes is a useful and effective technique. 

You can speed up the drying process by placing a fan close to the wet shoes to increase airflow. 

When you need to dry shoes rapidly or when air drying isn’t working well because of high humidity or restricted ventilation, this approach comes in handy. 

The fan aids in maintaining a steady airflow around the shoes, which promotes moisture dissipation and evaporation. 

It is advised to position the fan far enough away from the shoes so that it can reach them efficiently without tipping them over. 

To ensure thorough and fast drying while reducing the risk of odor and mold, combine the fan approach with other drying strategies, such as packing the shoes with absorbent materials or using silica gel packs, for optimal results.

Also Read: How to Make Your Ceiling Fan Quiet?

Stuffing and Hanging

Dry Shoes using Stuffing and Hanging method

An easy way to dry shoes is to stuff them and hang them up, which helps them keep their shape and provides the best air circulation.

The first step is to fill the shoes evenly with crumpled paper or fabric. In addition to helping to absorb extra moisture, this supports the structure of the shoe and keeps it from deforming when drying. 

After the shoes are packed, hang them upside down from a solid hanger or clothesline in a well-ventilated place. 

When shoes are hung upside down, gravity helps to dry them out, especially the insoles and outsoles where moisture likes to collect. 

To ensure complete drying, hanging the shoes also encourages air circulation on all sides. 

When air drying alone can take longer, this method works particularly well for drying shoes after washing. 

You can attain quicker and more effective drying outcomes without compromising the quality of your shoes by combining stuffing and hanging with additional drying methods like employing a fan or silica gel packs.

Final Thoughts!

In conclusion, using a dryer to dry shoes doesn't have to be a loud process. You can successfully dry your shoes while causing the least amount of disturbance if you take some precautions, such removing any excess moisture and using techniques to reduce noise, like putting on a mesh bag or wrapping your shoes in towels. Considering the material and design of your shoes, it's imperative that you follow the care instructions to avoid damage. Moreover, investigating other drying techniques like air drying, using silica gel packs, or using fans, provides kinder and more silent solutions. You can guarantee that your shoes remain in top condition without having to deal with the inconvenience of excessive noise during the drying process by incorporating these tactics into your usual shoe care regimen.

About Author

Muhaiminul is the insightful article’s author on and a fervent DIY living enthusiast. Muhaiminul has spent countless hours learning about and exploring the world of soundproofing techniques and products because he has a deep fascination with creating peaceful and noise-free spaces. Muhaiminul shares helpful advice, detailed how-to guides, and product reviews on out of a desire to help others cultivate peace in their lives.

Quiet Hall Author

Muhaiminul Anik