Reflecting on the Journey

How to make heels less slippery? 10 Tips and Tricks

To make heels less slippery, there are several effective methods you can try. One option is to scuff the soles of your heels using sandpaper or a nail file to create more traction. Alternatively, you can apply grip pads or anti-slip sole stickers to the bottoms of your shoes for added traction.

how to make heels less slippery

High heels can make you look better and give you more confidence, but their smooth surfaces can sometimes make you fall. Walking in shoes that slip is not only uncomfortable, but it also puts you at risk of an accident. There are a number of effective ways to make your heels less slippery, so you can walk with confidence while staying safe. In this blog, we’ll talk about different ways and tools to make heels less slippery.

Why do my heels slip in shoes?

Heel slippage in shoes can be caused by smooth or worn-out soles that don’t have enough grip, a shoe that doesn’t fit well, or the type of material used to make the shoe. Moisture or sweat on the inside of the shoe can also make it easier to slip.

Slipping heels can be caused by a number of things that change how the shoes fit and grip the ground.

The lack of friction between the bottom of the shoe and the surface you’re going on is one of the main reasons. Shoes with worn-out or smooth soles tend to have less grip on different surfaces, which makes it more likely that your heels will slip.

Also, how well the shoe fits is very important. If the shoe is too big or doesn’t hold your foot firmly, your heel may lift slightly with each step, causing friction and causing you to slip. The material the shoe is made of can also make a difference. Some materials may slide more easily on smooth surfaces.

Also, sweat or wetness inside the shoe can cut down on friction and make the sole slippier. By doing things like putting on grip pads, using products that improve traction, or choosing shoes with grippy soles, you can stop your heels from slipping and make your shoes safer and more comfortable to wear.

Related For You: How to Make Heels Quieter – Tips & Tricks

Is heel slippage normal in new shoes?

Yes, experiencing heel slippage in new shoes is quite common. This is often because new shoes haven’t yet conformed to the shape of your feet. 

Most new shoes are made of stiffer materials, and the padding hasn’t had a chance to form to the shape of your foot yet. So, when you walk, your heels might move a little, which could make you slip. Your feet may also need some time to get used to the new shoes, and the grip may not be at its best until you’ve worn them a few times. To keep your heel from slipping when you’re wearing new shoes, try using inserts, wearing thicker socks, or any of the other ways we’ve talked about to improve grip until the shoes break in and get more comfortable.

Tips for Making Heels Less Slippery

Walking with poise and grace in heels is a fashion statement that shows poise and elegance. But the shiny surfaces of many heels can make it easy to slip, which could hurt both your style and your safety. The good news is that there are ways to deal with this issue and make your heels less slippery.

1. Smooth the Bottoms

Sanding the soles of your shoes is an effective way to make them less slippery. You can use sandpaper or a nail file to do this.

The main goal here is to make a platform with different textures that makes walking easier. Start by figuring out which parts of the sole touch the ground when you walk. Usually, this is the ball of the foot and the heel. When you sand, you should pay attention to these points of pressure.

Make sure your shoes are clean and dry to start. If there is dirt or other stuff on the feet, it could get in the way of sanding. Next, rub the nail file or sandpaper slightly over the spots you’ve marked. Put light pressure on it and move it back and forth. The goal is not to get rid of a lot of material, but to make a small amount of roughness that makes the surface stickier.

When grinding, it’s important to be careful. If you do it too much, you could hurt the shoe or make the structure uneven, which would be uncomfortable. After sanding, you can do an easy test to feel the difference in grip by walking on a smooth surface. If you find that the shoes give you a better grip, then you’ve done what you set out to do.

2. Apply Grip Pads

Putting grip pads or anti-slip bottom stickers on your shoes is a simple way to make them less slippery. Different types of shoes need different shapes and sizes of these sticky pads.

A few key steps are needed to make sure the process works well and gives you the best grip.

Before putting on the grip pads, you must make sure your shoes are ready. Start by cleaning the shoes very well to get rid of any dirt, dust, or residue. To clean the surface, use a wet cloth or water with a little mild soap. Before going on to the next step, make sure the soles are completely dry.

To get to the sticky side of the grip pad, peel off the back. Align the grip pad carefully with the bottom of the shoe, making sure it covers the spots where you put the most pressure on your feet when you walk. The ball of the foot and the heel are usually included in this.

Press the grip pad tightly and evenly onto the sole to make sure it stays in place. Make sure there aren’t any air bubbles under the tape, because that could affect how well it sticks. If the grip pad is bigger than the bottom, you can cut it to the right size with scissors.

Give the glue some time to set up so that it works as well as possible. Before putting on the shoes, it’s best to let the grip pads stick to the feet for a few hours.

3. Use Hairspray For Your heels

Hairspray is usually used to style hair, but it can also be used to temporarily make your shoe feet less slippery. To improve grip, this method includes making the soles a little bit sticky.

Follow these thorough steps to use hairspray in this way effectively:

Start by making sure the bottoms of your shoes are clean and free of any dirt, dust, or other things that might be in the way. You can gently clean the soles with a wet cloth or mild soap and water. Wait until they are completely dry before moving on.

Before putting hairspray on the shoe bottoms, shake the can of hairspray well. Spray a thin layer of hairspray on the parts of the feet that touch the ground. Do this while keeping the can far away. The ball of the foot and the heel are the main pressure points when walking, so it’s important to pay attention to them.

Let the hairspray dry fully after you put it on. Depending on the brand and type of hairspray, this could take anywhere from a few minutes to about 30 minutes. Make sure the hairspray is fully dry before you put on the shoes. This will make sure that the surface sticks well.

When the hairspray is dry, the feet will feel a little bit sticky or tacky when you touch them. This tackiness is what gives you a better grip on smooth surfaces and keeps you from sliding.

It’s important to remember that this method is only a short-term fix. The hairspray might make the hair less sticky over time or with more walking.

4. Use a non-slip spray

Non-slip sprays are made to help with the problem of shoes with soles that slip, especially on smooth surfaces. These sprays make an invisible layer that makes it easier to hold on and keeps you from falling.

Follow these thorough steps to use a non-slip spray well:

Start by getting your shoes ready. Make sure the feet are clean and have no dirt or debris on them. Cleaning the bottoms of the shoes helps the spray stick well.

Shake the anti-slip spray well to make sure that all of its parts are mixed well. This is very important if you want a uniform approach.

Holding the can of non-slip spray away from your shoes, spray the feet evenly. Make sure you cover the whole bottom of the shoe, including the parts that touch the ground when you walk.

Let the spray dry all the way. Depending on the product, the time it takes to dry can be different, so make sure to read the guidelines on the can. It’s important to wait the right amount of time for the spray to dry so that it makes a solid layer.

Once the spray has dried, the soles of your shoes will grip the ground better. The spray makes an invisible layer that makes it easier to grip different surfaces. This makes it easier to walk without worrying about falling.

Non-slip sprays can be especially helpful for shoes that don’t have grips built in. When you need a quick way to make your shoes less slippery, they are a good choice. But it’s important to remember that the spray may or may not work well depending on things like the material of your shoes and the area you’re walking on.

5. Use Rubber Cement

Rubber cement is a good way to make the soles of your shoes less slippery. With this method, you put a thin layer of rubber cement on the bottom of your shoes’ feet to make a rough surface that makes it easier to grip.

To use rubber cement well, follow these steps in detail:

Start by getting your shoes ready. Clean the shoes to get rid of any dirt or debris that could make it hard for the rubber cement to stick.

Put a little rubber cement on a clean surface, like a paper plate or a piece of cardboard. This makes it easier for you to control how much cement you use.

Get a small bit of rubber cement on a brush and spread it evenly across the soles of your shoes. Pay attention to the parts that touch the ground when you walk. To make sure the rubber cement dries right, you need to spread it out in a thin, even layer.

Let the rubber cement dry all the way. The time it takes to dry can change, but it usually takes between 20 and 30 minutes. During the drying process, make sure the shoes are in a place with good air flow.

Once the rubber cement has dried, the feet will have a different feel. They will feel like rubber or a little bit sticky. This new smoothness makes it easier to walk on smooth surfaces and less likely that you will slip.

6. Use clear polish on your nails

Clear nail paint is a smart and easy way to improve the grip on the bottom of your shoes. For this method, you put a layer of clear nail paint on the parts of the soles that need more grip. This makes the surface slightly sticky.

Follow these thorough steps to paint your shoe soles with clear nail polish:

Start by getting your shoes ready. Make sure the bottoms of the shoes are clean and free of dirt and other things. This makes sure the nail paint sticks well and makes a smooth layer.

Shake the bottle of clear nail paint gently to make sure it’s mixed well. Open the nail polish bottle and put a thin, even amount on the parts of the sole that touch the ground when you walk. Pay close attention to the ball of the foot and the heel, which get the most pressure.

Let the nail polish dry all the way. The time it takes to dry can change, but it’s usually between 20 and 30 minutes. During the drying process, make sure the shoes are in a place with good air flow.

As the nail polish dries, it will make the feet slightly sticky. This stickiness is what helps people get a better grip on smooth surfaces. You’ll notice that the bottom now has a different texture, which makes it less likely that you’ll slip when you walk.

7. Use salt to scrub the soles

Putting salt on your shoe soles to make them grip better is an easy and natural fix that can come in handy when you need a quick fix. In this method, the shoes are pressed into salt to give them a rough surface.

Here’s a full explanation of how to use this method well:

Start by getting a small amount of salt and spreading it out on a flat area. This can be done well with a plate, a box, or a piece of paper.

Hold one of your shoes and put the bottom of it gently on the salt. Put some pressure on the salt to make sure it sticks to the bottom of the shoe. You can also give the shoe a small twist to help the salt crystals stick to the bottom.

Do the same thing with the other shoe to make sure that salt crystals cover the bottoms of both shoes.

When the salt grains stick to the soles, the soles will have a slightly different feel. Salt grains make the surface rougher, which increases friction and makes it easier to walk on floors or other surfaces that are slippery.

8. Use Sticky Spray

Using a traction spray is a unique way to make your shoes’ soles stick better to smooth surfaces. Traction sprays are made to make a textured layer that gives you better grip and keeps you from falling.

Start by reading the traction spray’s instructions carefully and making sure you understand them. Different sprays may have different instructions for how to use them and how long they need to dry, so it’s important to follow the rules.

Before you use the grip spray, shake it well. This makes sure that the spray’s texturizing agents are well mixed and will be spread out evenly when used.

Hold the can of traction spray far from your shoes and spray the feet evenly. Make sure you cover the whole bottom of the shoe, including the spots where your foot presses against the ground.

Follow the guidelines on the bottle to let the traction spray dry completely. The amount of time it takes to dry can vary, but usually it’s best to give it a lot of time to set and form a solid layer.

Most traction sprays have a mix of glue and roughening agents that work together to make smooth surfaces easier to grab. This textured layer can make a big difference in how well your shoe grips the ground and stays stable when you walk.

After the spray dries, you’ll probably find it easier to walk on areas that used to be slippery.

9. Make your own grip pads

Making your own traction pads is a creative way to make your shoe soles grip better. This method involves making traction pads out of easy-to-find materials that can be attached tightly to the parts of the sole that need more grip.

Follow these detailed steps to use this do-it-yourself method well:

Start by getting the things you need. You will also need a strong glue like super glue or fabric glue and small pieces of sandpaper or rubber shelf cover. For making the DIY traction pads, you need these things.

Measure and cut the rubber shelf lining or sandpaper to fit the parts of the sole that touch the ground when you walk. Usually, the ball of the foot and the heel are these places.

Once you have pieces that are the right size, use the glue to stick them to the bottom. Put glue on the back of the pieces you cut out and press them firmly onto the bottom. Make sure to put them in a safe place so they won’t fall off while they’re being used.

Follow the directions from the manufacturer to let the glue dry. This makes sure that the DIY traction pads are securely attached to the bottom of the shoe and won’t come off easily.

The sandpaper or rubber shelf cushion makes a rough surface that makes it easier to hold on to. This makes it less likely that you will slip on smooth or wet surfaces.

10. Choose heels with soles that have texture

Choosing shoes with naturally textured or patterned soles is a good way to make sure you have better grip from the start. This method involves choosing shoes that already have gripping features built in. This makes it less likely that you will slip on different surfaces. 

When you’re buying new heels, pay close attention to the bottoms. Look for shoes with designs on the bottom that have roughness or patterns. Some of these surfaces are small grooves and ridges, while others are more complicated patterns that are built into the design of the sole.

The more surface area that touches the ground with these naturally rough soles, the better they grip.

Choosing the right kind of boots can make a big difference in how comfortable and stylish they are to walk in.

Even though everyone has different tastes, some types of heels are usually easier to walk in because of how they are made.

For example, block heels have stable, wide bases that spread your weight evenly. Wedges, which have a full sole, also offer constant support.

Platform heels reduce the slope of your foot, making taller shoes feel easier to walk in, and ankle strap heels stop your foot from moving forward.

Low heels and kitten heels can give you height without taking away from comfort.

In the end, putting stability, support, and comfort at the top of your list when choosing heels can make walking easy and improve your confidence and sense of style.

Finally!

Slippery heels can be a real problem, but with the right tips and products, you can make them much less slippery and feel more confident when you wear them. It’s easy to make your feet less slippery. You can sand them or buy grip pads and traction sprays, which are both simple things you can do yourself. Make sure you put both style and safety first so you can walk around with confidence.

About Author

Muhaiminul is the insightful article’s author on Quiethall.com and a fervent DIY living enthusiast. Muhaiminul has spent countless hours learning about and exploring the world of soundproofing techniques and products because he has a deep fascination with creating peaceful and noise-free spaces. Muhaiminul shares helpful advice, detailed how-to guides, and product reviews on Quiethall.com out of a desire to help others cultivate peace in their lives.

Quiet Hall Author
Muhaiminul Anik
More
articles